auxiliary
Aux routing, filter and LFO pages
Pages shared by several aux tracks — M2 routes instrument tracks in, M3 is a high-pass and low-pass filter with sends on its shift layer, and M4 is an LFO aimed at one of the track's own parameters.
These pages behave alike on every aux track that has them. The filter trims the lows and highs of what the track outputs, keeping a reverb return clean; the LFO moves one of the track's own settings.
Details
- TE’s guide
The brain, external audio, tape and both FX tracks have a routing page on M2.
- TE’s guide
On a routing page, an encoder click toggles the page between tracks 1–4 and tracks 5–8; turning a track's encoder adds or removes it, and on tape and external audio sets how much goes in.
- TE’s guide
External audio, tape and both FX tracks have the filter on M3; those four plus external MIDI have the LFO on M4.
- TE’s changelog
OS 1.1.32 fixed aux track LFOs failing to affect the page parameters.
- community
Community charts put the aux sends on CC37–39 of the track's channel.
- checked on a unit · 1.1.33
Over MIDI, CC32 and CC35 move the external audio track's high-pass and low-pass and CC40–43 its LFO; the external MIDI track's LFO answers CC40–43 too.
- checked on a unit · 1.1.33
On external audio the filter starts switched off; its high-pass is drawn rising from the left and its low-pass falling from the right.
Parameters
| parameter | gesture | range | cc |
|---|---|---|---|
| high-pass cutoff M3 | turn dark grey encoder | – | 32 |
| low-pass cutoff M3 | turn white encoder | – | 35 |
| tape send M3 | shift+turn mid grey encoder | – | – |
| FX I send M3 | shift+turn light grey encoder | – | – |
| FX II send M3 | shift+turn white encoder | – | – |
| LFO speed M4 | turn dark grey encoder | – | – |
| LFO amount M4 | turn mid grey encoder | – | – |
| destination M4 | turn light grey encoder | – | – |
| parameter M4 | turn white encoder | – | – |