auxiliary
External CV track
sends note pitch as control voltage and a gate from the multi-out jack, so the keyboard and sequencer can play modular and vintage synths.
The simplest aux track: the guide gives it no page settings, only notes, and on the unit its page is just a voltmeter. Set the multi-out to cv before plugging in, patch pitch and gate into the synth, then play like any other track.
How to
Set the multi-out to CV and gate
before you start nothing plugged into the multi-out
- 1
- 2 until cv shows
Details
- TE’s guide
Modular and vintage synths take pitch as a control voltage (CV) and note on/off as a gate.
- TE’s guide
On the external CV track () the keyboard and sequencer play the connected CV device.
- TE’s guide
The multi-out carries CV on its tip (left) and gate on its ring (right).
- TE’s guide
Use a splitter cable that separates left and right, not one that keeps stereo — tip to the CV input, ring to the gate input.
- checked on a unit · 1.1.33
The CV track's page is a voltmeter labelled CV, reading from −5 to +5 V.
- checked on a unit · 1.1.33
CC12–15 on its channel (12) move nothing on that page.