Inside temperature

The closed furnace

View

Camera

× 1.0

Layers

Readings

Two closed steel furnaces hold the same block of iron. In the right-hand one the iron is at 1500 K. In light they are identical, and since they hold the same mass even the near-field view cannot tell them apart.

In thermal gravitational radiation both blocks show through the steel, and the hot one far outshines the cold. Along a line of sight through the middle of each block it is 22 times the brighter, or 16 times with the glow of the floor behind counted. Matter is transparent to its own gravitational glow, so the camera reads the temperature inside, not the temperature of the skin.

Every solid thing at room temperature glows faintly too. The bright line along the foot of the far wall is the floor itself, seen at a slant: there a line of sight crosses five times more concrete than looking straight down. A transparent glowing slab is brightest edge-on.

Iron and steel are given the friction of iron’s spectrum. A metal’s friction falls as 1/T, so the hot block has a fifth of the cold one’s: volume for volume it sends 26 times the cold block’s gravitons, not the 134 that equal friction would give. Silica glass stands for concrete and plaster. Air is given no friction, so the air inside each furnace adds nothing.

Expected brightness at the centre of view
7.6×10−16 gravitons s−1m−2sr−1

The gravity side is the expected thermal image: the glow of everything along each line of sight, with colour standing for temperature. It is what the camera would build up over a long exposure: everything in this view sends a detector of one square metre one graviton every 4.3×107 years. Where the paper has an estimate of a material’s friction, the material carries it. The others keep the placeholder 10−3 Pas, unless the text above gives another.

“Tidal field” shows what every mass in the room has, hot or cold: the tensor at every point of a slice through the room, as a wash of colour for the direction of the stretch with fine strokes along it. Its value at the camera itself, in s⁻² and source by source, is under “Physics”.

Turning off “Room” removes the glow of the floor and walls, which is known in advance. Glows add up, so this is exact.

All demos